Privacy that disappears.
One continuous piece of matte TPU, 0.075 mm thin. No slider bulge, no residue. Your MacBook closes perfectly flat - and the lens is fully blocked.
Choose your pack
Same 0.075 mm cover - pick how many you need. Multi-packs ship free.
Single
- 1 × cover
- Alcohol prep pad + alignment card
- Free shipping · free size swap
Fit Kit ×3
- 3 × covers
- 2 × prep pads + storage card
- Free shipping · free size swap
Team ×10
- 10 × covers
- Bulk prep pads · logo print (MOQ 100)
- Free shipping · free size swap · VAT invoice
30-day returns · Reusable 100+ times · We match the cover to your MacBook model
See it in action.
Real footage, no renders: this is how thin it actually is.
Thinner than a sheet of paper.
Sliders are 1-3 mm thick and press into the panel. Slate is a die-cut film that behaves like the bezel itself - the lid shuts with no gap and no pressure marks.
Micro-suction, not glue.
A washable silicone layer grips the bezel glass with thousands of microscopic cavities. Nothing is glued, so nothing is left behind.
- No adhesive residue, no yellowing, no ghost outlines
- Rinse under water to restore full grip - 100+ cycles verified
- Matte black face visually merges with the bezel
Nothing sticks out.
Only a 1.2 mm tab rises above the metal display edge - enough to lift with a fingernail, invisible when the lid is closed.
- Sits over the lens only - LED and light sensor stay open
- Rounded R0.7 contours, no hard edges against the glass
- Removes in one piece, re-applies instantly
Everything you need. Once.
Prep pads, an alignment card and a reusable storage card for travel. When the micro-suction picks up dust, rinse it under lukewarm water - grip comes back.
- No consumables, no replacement strips
- Storage card keeps spare covers safe
- Free size swap on every order
Every other cover is a compromise.
We measured the alternatives. This is why Slate exists.
| Slate 0.075 | Slider clip | Tape / sticker | |
|---|---|---|---|
| Thickness | 0.075 mm | 1-3 mm | ~0.1 mm |
| Lid closes flat | Yes | No - presses into screen | Mostly |
| Residue on glass | None | None | Adhesive residue |
| Reusable | 100+ cycles | Yes | Single use |
| Visible when closed | Invisible | Bulge in the lid | Flat |
| Camera usable in seconds | Lift tab | Slide | Peel & re-stick |
Ninety seconds, once.
Everything you need is in the box - alcohol pad, alignment card, storage card.
Clean the bezel
Wipe the glass around the camera with the included alcohol pad and let it dry fully.
Align the tab up
Position the cover so the small tab points toward the top edge of the display.
Set the height
Slide up until the tab sits 1.2 mm above the metal edge - you can just feel it with a fingernail.
Press and check
Press flat, close the lid, reopen. No gap, no pressure marks, camera dark.
| MacBook Air 13″ / 15″ | ✓ fits |
| MacBook Pro 13″ / 14″ / 16″ | ✓ fits |
| iPad Pro / Air, external monitors | ✓ fits |
Pick your model in the order form and we match the cover to it.
Leave a request - we'll handle the rest.
No online payment. Tell us which pack you want and how to reach you - we confirm every order personally before anything is charged or shipped.
Questions
Will it damage my display?
No. There is no adhesive and no core stiffener - at 0.075 mm the cover is well under the lid clearance, so closing the MacBook applies no meaningful pressure to the panel.
Does it block the green camera LED?
No. The body covers the lens only; the indicator LED and ambient-light sensor sit outside the covered area.
How do I remove it?
Lift the 1.2 mm tab with a fingernail. It peels off in one piece and can be re-applied immediately.
What if adhesion drops?
Rinse the silicone side under lukewarm water, no soap, and air-dry. Grip returns. Rated for 100+ cycles.
Will it fit my MacBook?
Yes. In the order form you pick your exact model and chip, and we match the cover to it before shipping. If anything is off, the size swap is free.
Can I get my company logo on them?
Yes - matte white or grey print, minimum order 100 units. Contact us after ordering the Team pack.
Stay in the loop
New products and stock drops - a couple of emails a year, nothing more.
An ultra-thin reusable webcam cover for MacBook. Matte TPU, micro-suction grip, zero residue.